 |
 |
| Sparkle in IIDEX
Sep, 30th, 2006 - Toronto, ON.
The appearance of Porcelain Tile Center in IIDEX / NeoCon Canada 2006 attracted eyes of many designers. They were inspired by the new designs, the fresh ideas, the huge format, the water jet cutting...
As you can read from the name, our main products are porcelain tile, which has a water absorption level of 0.5%. It is frost resistant, easy to lay and keep clean, and is highly resistant to wear and tear over time. Porcelain tile are more and more popular in Canada, and Porcelain Tile Center will be your natural choice.
Glazed porcelain tile, soft surfaces and nuanced styles for these satin finished marble floor tiles envelop daily living in a unique aesthetic delight. A whole set of mosaic, listelo, bullnose, v-cap can be applied into your design.
It is suitable for a wide range of residential or non-residential applications, both outdoor and indoor, including bathrooms and kitchens. Normal sizes: 20"X20" 13"X13" other sized can be cut from them.
Lava is the non-slippery glazed porcelain tile. The beauty of natural stones, the high performance of a through-body porcelain tile and the easy cleaning of glazed ceramic surfaces. A material suitable for walls, floors and exterior claddings in residential and commercial buildings, both indoors and out, including bathrooms and kitchens.
The amazing design in the picture is from water-jet cutting. It is control by computer draft and the entire curve can be cut out. We accept special design orders from designers.
Sizes available: 24"X24", 12"24",12"X12"
CITY METAL is glazed porcelain tile with contemporary metallic-effect finishes, fired at about 1300'C (2400 F), with a water absorption rate of less than 0.5%, suitable for use on floors and walls.
It is frost-resistant and can be cleaned using normal detergents, it is more resistant to acids than metal itself, it does not rust and is guaranteed to remain the same over time.
The normal sizes are 32"X32", 24"X24", and other particular size can be cut from these.
You can find more in our Product Collections.
COCO WOOD is glazed porcelain tile with natural wood-effect finishes, fired at about 1300'C (2400 F), with a water absorption rate of less than 0.5%, suitable for use on floors and walls.
It is frost-resistant and can be cleaned using normal detergents, it is more resistant to wood itself, good coordination with wood floor or carpet in the house.
The normal sizes are 12"X24", and other particular size can be cut from these.
You can find more in our Product Collections.
2010-05-21 10:09 |
|
